On the Choice of Tool Material in Friction Stir Welding of Titanium Alloys

Friction Stir Welding (FSW) is a solid state welding process patented in 1991 by TWI; initially adopted to weld aluminum alloys, is now being successfully used also for magnesium alloys, copper and steels. The wide diffusion the process is having is due to the possibility to weld both materials traditionally considered difficult to be welded or "unweldable" by traditional fusion welding processes due to peculiar thermal and chemical material properties, and complex geometries as sandwich structures and straightening panels. Recently, research is focusing on titanium alloys thanks to the high interest that such materials are getting from the industry due to the extremely high strength-weight ratio together with good corrosion resistance properties. At the moment, the main limit to the industrial applicability of FSW to titanium alloys is the tool life, as ultra wear and deformation resistant materials must be used. In this paper a, experimental study of the tool life in FSW of titanium alloys sheets at the varying of the main process parameters is performed. Numerical simulation provided important information for the fixture design and analysis of results. Tungsten and Rhenium alloy W25Re tools are found to be the most reliable among the ones considered

Network Virtual Machine (NetVM): A New Architecture for Efficient and Portable Packet Processing Applications

A challenge facing network device designers, besides increasing the speed of network gear, is improving its programmability in order to simplify the implementation of new applications (see for example, active networks, content networking, etc). This paper presents our work on designing and implementing a virtual network processor, called NetVM, which has an instruction set optimized for packet processing applications, i.e., for handling network traffic. Similarly to a Java Virtual Machine that virtualizes a CPU, a NetVM virtualizes a network processor. The NetVM is expected to provide a compatibility layer for networking tasks (e.g., packet filtering, packet counting, string matching) performed by various packet processing applications (firewalls, network monitors, intrusion detectors) so that they can be executed on any network device, ranging from expensive routers to small appliances (e.g. smart phones). Moreover, the NetVM will provide efficient mapping of the elementary functionalities used to realize the above mentioned networking tasks upon specific hardware functional units (e.g., ASICs, FPGAs, and network processing elements) included in special purpose hardware systems possibly deployed to implement network devices

A SIMULATION TOOL ASSISTING THE DESIGN OF A CLOSE RANGE PHOTOGRAMMETRY SYSTEM FOR THE SARDINIA RADIO TELESCOPE

The Sardinia Radio Telescope (SRT) is a 64 m diameter antenna, whose primary mirror is equipped with an active surface capable to correct its deformations by means of a thick network of actuators. Close range photogrammetry (CRP) was used to measure the self-load deformations of the SRT primary reflector from its optimal shape, which are requested to be minimized for the radio telescope to operate at full efficiency. In the attempt to achieve such performance, we conceived a near real-time CRP system which requires the cameras to be installed in fixed positions and at the same time to avoid any interference with the antenna operativeness. The design of such system is not a trivial task, and to assist our decision we therefore developed a simulation pipeline to realistically reproduce and evaluate photogrammetric surveys of large structures. The described simulation environment consists of (i) a detailed description of the SRT model, included the measurement points and the camera parameters, (ii) a tool capable of generating realistic images accordingly to the above model, and (iii) a self-calibrating bundle adjustment to evaluate the performance in terms of RMSE of the camera configurations

On the role of intermetallic and interlayer in the dissimilar material welding of Ti6Al4V and SS 316L by friction stir welding

Joining titanium with stainless steel can lighten the structure of numerous industrial applications. However, a vast disparity of thermal, physical, and chemical properties between these alloys leads to defects in conventional arc welding techniques, viz., brittle intermetallic compounds, pores, cracks, etc. Friction stir welding (FSW) is a renowned solid-state joining technology for creating dissimilar material joints producing visco-plastic material flow at the interface. The present investigation compares the intermetallic layer thickness and properties as a function of the thickness of the Cu interlayer sandwiched in lap joints. Macrostructural and microstructural characterizations were carried out to understand the localized microstructural evolution comprising intermetallic, grain refinement, defects, etc. Mechanical properties were also evaluated for prepared lap joints

Storage and perpendicular retrieving of two-dimensional pulses in electromagnetically induced transparency media

Propagation of two dimensional pulses in electromagnetically induced tranparency media in the case of perpendicular storing and retrieving pulses has been analyzed. It has been shown that propagation control of the pulses in optically thick media can be used for producing interchange between pulse time-shape and intensity profile distribution. A simple obvious analytical solution for the retrieved new field has been obtained.Comment: 6 pages, 4 figure

Selective Laser Melting of Ti6Al4V: Effects of Heat Accumulation Phenomena Due to Building Orientation

Titanium alloy Ti6Al4V is one of the most utilized alloys in the field of additive manufacturing due to the excellent combination of mechanical properties, density and good corrosion behavior. These characteristics make the use of this material particularly attractive for additively manufacturing components with complex geometry in sectors such as aeronautics and biomedical. Selective Laser Melting (SLM), by which a component is fabricated by selectively melting of stacked layers of powder using a laser beam, is the one of most promising additive manufacturing technologies for Ti6Al4V alloy. Although this technique offers numerous advantages, it has some critical issues related to the high thermal gradients, associated with the process, promoting the formation of a metastable martensitic microstructure resulting in high tensile strength but poor ductility of the produced parts. The formation of microstructural defects such as balling and porosity can occur together with the presence of residual stresses that may significantly affect the mechanical characteristics of the component. Specific process parameters and geometries can determine heat accumulation phenomena that result in a progressive decrease in thermal gradients between layers. These heat accumulation phenomena are influenced by the number of layers deposited, but also by the building orientation that, for a given geometry, determines a variation of the deposited surface for each layer. © 2022 The Author(s). Published by Trans Tech Publications Ltd, Switzerland

Cetacean strandings and museum collections: A focus on Sicily island crossroads for mediterranean species

The study examined the extent of the cetacean strandings in Italy, with a particular focus on Sicily Island. The paper aimed to contribute to the description of a pattern that contemplates the “regular and rare” cetacean species passage along the Sicilian coast. The estimate of marine cetacean strandings was extrapolated from the National Strandings Data Bank (BDS—Banca Dati Spiaggiamenti) and evaluated according to a subdivision in three coastal subregions: the Tyrrhenian sub-basin (northern Sicilian coast), the Ionian sub-basin (eastern Sicilian coast), and the Channel of Sicily (southern Sicilian coast). Along the Italian coast, more than 4880 stranding events have been counted in the period 1990–2019. Most of these were recorded in five Italian regions: Apulia, Sicily, Sardinia, Tuscany, and Calabria. Approximately 15% of the recorded strandings in Italy occurred on the Sicilian coast. In Sicily Island, 725 stranded cetaceans were recorded in 709 stranding events, resulting in approximately 20 carcasses every year; the total number of specimens identified to species level was 539. The distribution along the Sicilian coast was the following: 312 recorded in the Tyrrhenian sub-basin, 193 in the Ionian sub-basin, and 220 in the Channel of Sicily. Stenella coeruleoalba was the species that can be considered as the stable record along the time-lapse investigated, and some rare species have been recorded as well. The role of Sicily Island as a sentinel territory of the cetacean distribution for the central Mediterranean Sea and as a region receiving a marine resource suitable for the scientific research and cetological museum collections is discussed herein

RELAP5-3D thermal hydraulic analysis of the target cooling system in the SPES experimental facility

The SPES (Selective Production of Exotic Species) experimental facility, under construction at the Italian National Institute of Nuclear Physics (INFN) Laboratories of Legnaro, Italy, is a second generation Isotope Separation On Line (ISOL) plant for advanced nuclear physic studies. The UCx target-ion source system works at temperature of about 2273 K, producing a high level of radiation (10^5 Sv/h), for this reason a careful risk analysis for the target chamber is among the major safety issues. In this paper, the obtained results of thermofluid-dynamics simulations of accidental transients in the SPES target cooling system are reported. The analysis, performed by using the RELAP5-3D 2.4.2 qualified thermal-hydraulic system code, proves good safety performance of this system during different accidental conditions